I made these custom end tables for a friend using furniture grade plywood (which just means it's a higher quality type of plywood). The sheets were made out of Red Oak, were 121.92 x 54.61 x 1.9 cm (48 x 21.5 x 0.75 inches) in dimension, and cost about $20 each.
The stain I used was Minwax in "Dark Walnut 2716", which was about $10 for the small can, and the satin poly I used for the finish was honestly a random can that I had lying on my shelf...
__________________________________________________________________ Donate, volunteer, and help out if you have the means to do so. A small difference can often go a long way
